电路板故障诊断中神经网络信息融合技术的应用

将信息融合技术应用到导弹电子设备的电路板故障诊断之中．提出了一种基于红外热成像实验的温度故障隶属度函数构造形式以及改进的BP神经网络算法。进行了BP神经网络信息融合故障诊断的实验研究．从结果看信息融合能较好地解决电路板元件故障诊断的不确定性问题。     

Theoretical study of a potential low-noise semimetal-basedavalanche photodetector

The authors present a theoretical analysis of a possible avalanching photodetector (APD)-based on II-VI compound semiconductors. Each unit cell is composed of a HgTe layer, or a similar semimetal, sandwiched between two layers of CdTe and HgCdTe or similar semiconducting materials. The barrier layers are graded so that the leading barrier height is just high enough to eliminate the thermionic emission dark current out of the well. The use of a semimetal within the well has a distinct advantage over a semiconductor, which is that the ionization process is essentially an interband mechanism since the confined carriers within the well lie within the overlapping conduction and valence bands. As a result, the concentration of target carriers is virtually inexhaustible as in a conventional interband device     

保安矿柱回采地压监测数据分析

通过现场在马头门附近设立监测站进行长期监测井筒地压，分析了井筒附近地压活动规律，并与数值模拟分析值进行对比验证，从而为安全、高效地提前回收保安矿柱提供有力的保障。     

前馈和反馈相结合的控制策略在宝钢线材厂控冷轧线上的应用实践

在详细分析料坯在水箱内冷却热过程特点的基础上，提出了前馈和反馈相结合的水流量优化控制策略，并将该策略应用于宝钢线材厂控冷轧线上。实际运行结果表明：该策略能够合理地控制水箱水流量，从而保证了线材水箱出口处的温度满足工艺要求，大大提高了线材成品的质量。所做工作对国内同类企业有重要的意义。     

Self Assembly of Polymer Structures Induced by Electric Field

A method has been developed for fabricating polymer microstructures based on electric field induced self assembly and pattern formation. A dielectric fluid placed in between two conductive plates experience a force in an applied electric field gradient across the plates, which can induce a diffusive surface instability and self construction of the fluid surface. This process is exploited for the fabrication of self assembled polymer microstructures as well as replicated patterns through the use of pre-patterned plates or electrodes. FEM simulation is used to decide the minimum wavelength and electric gradient distribution of polymer structures. A variety of structures in the micron and nanometer scales including bio-fluidic MEMS, polymer optoelectronic devices can be fabricated using this method.     

钢的连铸用保护渣的表征

在钢的连铸过程中,结晶器保护渣的性质强烈地影响着铸造的行为、钢的质量、以及连铸工艺的环境.本研究采用高温显微技术来研究保护渣的熔化行为,采用液滴测试方法来测定保护渣的熔化速率.结果表明:自由碳是控制保护渣熔化行为的主要因素.熔化速率随碳的反应能力的增加而增加,随着碳含量的减少而增加.     

石英晶体监控法镀制高精度光学薄膜

讨论了石英晶体监控法在光学薄膜镀制过程中的应用原理。通过与常规的光学监控法镀制的膜层相比较．证实了石英晶体监控法有助于提高光学薄膜的光学品质。试验表明所镀膜层的光学性能优异，在光通信和激光器等领域具有广阔的应用前景。     

提高热采注汽系统热效率的研究

为了降低热采成本和提高经济效益 ,建立了热采注汽系统热效率的数学模型。根据实测数据计算了 9个注汽系统的热效率。提出了改进注汽系统热效率的行之有效的措施。根据排烟的氧含量的大小 ,可以确定注汽锅炉热效率改进程度 ;按管线允许热损失量和保温材料种类 ,设计保温层厚度 ,可大大提高输汽管线热效率。仅此两项 ,即可使大部分注汽系统热效率提高 7%以上 ,井底蒸汽干度提高 10 %以上。     

ZG3Cr13钢经长期时效后组织及硬度的研究

研究了ZG3Cr13钢在550℃～600℃的工作温度区间经2500h长期时效后的硬度及组织的变化。结果表明，在时效1000h内，硬度有明显的下降，之后趋于稳定；组织变化与正常处理后的组织均匀化程度有关，原始组织越均匀组织稳定性和热强性越高。